Bonsai growth can occur naturally if a seed grows in a very small packet of soil. This restricts the root growth and thus caused dwarfing of the plant.
Many think that bonsai growing is difficult but this is not so if you follow some general principles. Most bonsai trees are very hardy and can live for hundreds of years if care is taken. In fact, some bonsai trees last longer as a bonsai plant than in nature.
The general principle of bonsai is to restrict growth of the bonsai tree to a minimum by root pruning and top and tip pruning. Another aspect is to use a small container and this restricts root growth. The main principle is to do root pruning and tip pruning every few years for an advanced plant. This avoids the bonsai plant becoming root bound and dying.
One can also achieve a advanced bonsai plant by some tricks. One can select advanced pants that can be reduced to the bonsai form with small proportions. The best time to do this is in late winter and spring and to wait before new growth occurs.
There are several classical forms of bonsai. The first is formal upright. This has an trunk which is erect and has evening spaces branches. The truck is in the middle of the pot. The second form is informal upright with gentle twists to the trunk. Slanting is where the trunk slants over to one side. Another form is cascading where the branches go deeper than the container. One needs the plant on a stand for this form.
To achieve these forms, after root pruning one uses copper wire or some soft similar wire to hold the branches in the correct form. One wraps the wire around the trunk and then out the branches in question. One needs to take care not to make excessive bends as this can break the branch. One can also hold the wire down by fishing line and one can also use stakes to hold the branches up to the correct placement.
Bonsai ned a very good light or sunlight and are best grown outdoors to keep the plants healthy. Some plants need protection from the hot summer sun in a tropical area. Water the pots when the soil drys out on the surface.
Bonsai tree growing is very rewarding and easy so why not give it a try. There are many bonsai nurseries that sell advanced trees as well as the growing pots, wire and other supplies. All bonsai nurseries offer good advice and tips for free.
Thursday, July 8, 2010
Wednesday, July 7, 2010
Bonsai Wiring Basics
Wrapping aluminum or copper wires around the trunk or branches of bonsai trees in order to give them the intended profile is known as wiring. In order to produce basic bonsai styles, you will need to wrap the trunk and branches with the correct thickness and length of wire. The formal upright style involves no wrapping, but the cascade shape involves a few months of careful wiring.
You should be very careful when you’re applying wire to the trunk or branches of a bonsai tree due to the stress it causes. Doing it the wrong way can mean, if worse comes to worst, a dead tree, or more often a cracked branch. Another mistake is to wrap in too constricting a fashion or in the wrong season. This can cause lasting damage to the tree, or might even kill it outright.
Prior to actually wiring your bonsai, use a stick or pole to practice. This will help you in getting a feel for the wire and will help you develop the suppleness necessary to wrap a branch while holding it. When you feel like you’ve gotten the entire process mastered through your practice sessions, and you aren’t moving anything that you shouldn’t be, then you can try the same thing with the bonsai tree.
Step one is picking the most appropriate wire for the project. Copper and aluminum are the two favorite choices, although copper is thought to be more attractive throughout the extended training period. When wrapping a bonsai, use annealed copper only, as steel wire is toxic to a few species. Aluminum is a lot more flexible, so it’s easier to use for someone who is new at this kind of project. Although copper is stiffer, it might scar the tree if it is not applied properly. Using wire that’s one third as thick as the branch it’s going to wrap is a basic rule with which to begin.
Well placed little stresses along the tree trunk or branch are what allows the wire to change the shape of the tree. So, in order for the tree to change its shape and not the wire, the wire needs to be stronger than the branch or trunk.
Try wrapping branches from comparable trees to improve your skill and dexterity. Test different thicknesses of wire on branches of a similar species and size before using it on the bonsai. A variety of widths will be needed in order to wire the entire tree so try working with all of them in advance.
To master the delicate skill of bonsai wiring, patience is required. Do not be discouraged, though, because if you’re prepared to take the time you can learn how to do this, and you’ll be so happy with the results.
You should be very careful when you’re applying wire to the trunk or branches of a bonsai tree due to the stress it causes. Doing it the wrong way can mean, if worse comes to worst, a dead tree, or more often a cracked branch. Another mistake is to wrap in too constricting a fashion or in the wrong season. This can cause lasting damage to the tree, or might even kill it outright.
Prior to actually wiring your bonsai, use a stick or pole to practice. This will help you in getting a feel for the wire and will help you develop the suppleness necessary to wrap a branch while holding it. When you feel like you’ve gotten the entire process mastered through your practice sessions, and you aren’t moving anything that you shouldn’t be, then you can try the same thing with the bonsai tree.
Step one is picking the most appropriate wire for the project. Copper and aluminum are the two favorite choices, although copper is thought to be more attractive throughout the extended training period. When wrapping a bonsai, use annealed copper only, as steel wire is toxic to a few species. Aluminum is a lot more flexible, so it’s easier to use for someone who is new at this kind of project. Although copper is stiffer, it might scar the tree if it is not applied properly. Using wire that’s one third as thick as the branch it’s going to wrap is a basic rule with which to begin.
Well placed little stresses along the tree trunk or branch are what allows the wire to change the shape of the tree. So, in order for the tree to change its shape and not the wire, the wire needs to be stronger than the branch or trunk.
Try wrapping branches from comparable trees to improve your skill and dexterity. Test different thicknesses of wire on branches of a similar species and size before using it on the bonsai. A variety of widths will be needed in order to wire the entire tree so try working with all of them in advance.
To master the delicate skill of bonsai wiring, patience is required. Do not be discouraged, though, because if you’re prepared to take the time you can learn how to do this, and you’ll be so happy with the results.
Sunday, June 20, 2010
How to Fit In at a New Company |Dodging Landmines
"Don't come in swinging!" suggests Starla Sireno, executive coach at Fearlessness Inc. Instead, start by asking questions and observing. Look to the top level executives for clues about the corporate culture. Are they very informal, or do things seem more rigid? Be especially careful when changing industries. Everything, down to the way coworkers communicate, can be different.
Tuesday, June 1, 2010
Thursday, May 20, 2010
Teamwork Don'ts |Leila's House of Corrections
High-functioning teams don't usually happen easily or naturally. Learn how to tie a diverse team together by giving everyone time to get to know each other, recognizing that people think differently, and remembering that conflict can actually create new ideas and better results.
Bonsai Wiring Basics
Wrapping aluminum or copper wires around the trunk or branches of bonsai trees in order to give them the intended profile is known as wiring. In order to produce basic bonsai styles, you will need to wrap the trunk and branches with the correct thickness and length of wire. The formal upright style involves no wrapping, but the cascade shape involves a few months of careful wiring.
You should be very careful when you’re applying wire to the trunk or branches of a bonsai tree due to the stress it causes. Doing it the wrong way can mean, if worse comes to worst, a dead tree, or more often a cracked branch. Another mistake is to wrap in too constricting a fashion or in the wrong season. This can cause lasting damage to the tree, or might even kill it outright.
Prior to actually wiring your bonsai, use a stick or pole to practice. This will help you in getting a feel for the wire and will help you develop the suppleness necessary to wrap a branch while holding it. When you feel like you’ve gotten the entire process mastered through your practice sessions, and you aren’t moving anything that you shouldn’t be, then you can try the same thing with the bonsai tree.
Step one is picking the most appropriate wire for the project. Copper and aluminum are the two favorite choices, although copper is thought to be more attractive throughout the extended training period. When wrapping a bonsai, use annealed copper only, as steel wire is toxic to a few species. Aluminum is a lot more flexible, so it’s easier to use for someone who is new at this kind of project. Although copper is stiffer, it might scar the tree if it is not applied properly. Using wire that’s one third as thick as the branch it’s going to wrap is a basic rule with which to begin.
Well placed little stresses along the tree trunk or branch are what allows the wire to change the shape of the tree. So, in order for the tree to change its shape and not the wire, the wire needs to be stronger than the branch or trunk.
Try wrapping branches from comparable trees to improve your skill and dexterity. Test different thicknesses of wire on branches of a similar species and size before using it on the bonsai. A variety of widths will be needed in order to wire the entire tree so try working with all of them in advance.
To master the delicate skill of bonsai wiring, patience is required. Do not be discouraged, though, because if you’re prepared to take the time you can learn how to do this, and you’ll be so happy with the results.
You should be very careful when you’re applying wire to the trunk or branches of a bonsai tree due to the stress it causes. Doing it the wrong way can mean, if worse comes to worst, a dead tree, or more often a cracked branch. Another mistake is to wrap in too constricting a fashion or in the wrong season. This can cause lasting damage to the tree, or might even kill it outright.
Prior to actually wiring your bonsai, use a stick or pole to practice. This will help you in getting a feel for the wire and will help you develop the suppleness necessary to wrap a branch while holding it. When you feel like you’ve gotten the entire process mastered through your practice sessions, and you aren’t moving anything that you shouldn’t be, then you can try the same thing with the bonsai tree.
Step one is picking the most appropriate wire for the project. Copper and aluminum are the two favorite choices, although copper is thought to be more attractive throughout the extended training period. When wrapping a bonsai, use annealed copper only, as steel wire is toxic to a few species. Aluminum is a lot more flexible, so it’s easier to use for someone who is new at this kind of project. Although copper is stiffer, it might scar the tree if it is not applied properly. Using wire that’s one third as thick as the branch it’s going to wrap is a basic rule with which to begin.
Well placed little stresses along the tree trunk or branch are what allows the wire to change the shape of the tree. So, in order for the tree to change its shape and not the wire, the wire needs to be stronger than the branch or trunk.
Try wrapping branches from comparable trees to improve your skill and dexterity. Test different thicknesses of wire on branches of a similar species and size before using it on the bonsai. A variety of widths will be needed in order to wire the entire tree so try working with all of them in advance.
To master the delicate skill of bonsai wiring, patience is required. Do not be discouraged, though, because if you’re prepared to take the time you can learn how to do this, and you’ll be so happy with the results.
Monday, May 10, 2010
Easy Ways to Create a Beautiful Bonsai Garden
Even if you already own one bonsai tree, you might want to add a few more to create a bonsai garden in a few easy steps. This is the way to quickly start a garden created especially with your plants and personal style in mind.
One of the most visually appealing bonsai garden types is the rock garden. The plants are secured underneath beautiful rocks, and the amount of water and care you give your trees will determine how long the garden will last. For this type of setting you should choose plants that have strong roots and small leaves. To start off a rock bonsai garden, many folks pick a Ficus or an Oriental Bittersweet plant, which are available at many plant stores.
After choosing your desired botanical specimen, begin incorporating rocks into the dirt. The best place to look for rocks would be construction sites, or you can purchase a bag from the hardware store. The rocks you choose should be hard and strong, to ensure your tree gets the proper shape. You will also need to choose rocks that are somewhat damaged because you will want to put dirt and water in between the ridges. With this method you are giving the impression that the tree has grown right out of the rock, an interesting method of growth for the average garden or living space.
You may choose to start a bonsai garden with container plants you already own. Rock fountains or other decorative items like pillars will help show off the bonsai garden. Depending on the amount of space you have, you may also opt to create a man-made pond in the middle of your garden.
It is also ideal to have several types of trees in the garden. You can choose a tiny pine tree to be a part of the decorations, along with a cherry tree that has blossomed and grown cherries. When decorating, utilize the fact that different bonsai trees can be paired together, even if they don’t normally coexist in the same environments.
One of the most visually appealing bonsai garden types is the rock garden. The plants are secured underneath beautiful rocks, and the amount of water and care you give your trees will determine how long the garden will last. For this type of setting you should choose plants that have strong roots and small leaves. To start off a rock bonsai garden, many folks pick a Ficus or an Oriental Bittersweet plant, which are available at many plant stores.
After choosing your desired botanical specimen, begin incorporating rocks into the dirt. The best place to look for rocks would be construction sites, or you can purchase a bag from the hardware store. The rocks you choose should be hard and strong, to ensure your tree gets the proper shape. You will also need to choose rocks that are somewhat damaged because you will want to put dirt and water in between the ridges. With this method you are giving the impression that the tree has grown right out of the rock, an interesting method of growth for the average garden or living space.
You may choose to start a bonsai garden with container plants you already own. Rock fountains or other decorative items like pillars will help show off the bonsai garden. Depending on the amount of space you have, you may also opt to create a man-made pond in the middle of your garden.
It is also ideal to have several types of trees in the garden. You can choose a tiny pine tree to be a part of the decorations, along with a cherry tree that has blossomed and grown cherries. When decorating, utilize the fact that different bonsai trees can be paired together, even if they don’t normally coexist in the same environments.
Subscribe to:
Posts (Atom)